Extraction Unit Wall-mounted Metal Odour Stationary Filter
| Art. Nr. | WF-Eco Jet Pulse 0.75kW |
|---|---|
| P-549H | WF-Eco Jet Pulse HEPA Wall filter 0.75kW, 1-Phase, 230V, 50Hz. Without extraction arm |
| P-547H | WF-Eco Jet Pulse HEPA Wall filter 0.75kW, 3-Phase, 230V, 50Hz. Without extraction arm |
| P-051 | Flexi Extraction arm 1.5 m, suspended version |
| P-052 | Flexi Extraction arm 2 m, suspended version |
| P-053 | Flexi Extraction arm 3 m, suspended version |
| P-541 | Fine Filter Polyester |
| P-553 | Adapter for HEPA Filter |
| P-554 | HEPA filter 23m2 |
| P-557 | Blow out valve Ø 250mm |
<h1>Extraction unit Wall-mounted Metal Odour Idle Filter</h1>
The WF-Eco filter is designed for use in combination with the Flexi extraction arms equipped with an Active Carbon filter. With a filter efficiency of up to 99.9%, the WF-Eco is suitable for filtering fumes and odours in the metal industry. The clean air is recirculated in the workshop without heat loss.
Filtration takes place in two steps; pre-separation of coarse particles and filtration of fine particles with a replaceable filter cartridge. Replacement is easy and only takes a few minutes by means of the access panel on the front.
This WF Eco comes with an activated carbon filter for reducing gases. The remaining very fine dust, if present, can be separated by a HEPA filter. The HEPA filter is optional.
When the filter becomes saturated, the WF-ECO is connected to a compressed air connection, for this purpose a compressed air hose is supplied. The cleaning takes a few minutes; the filter is
Blown clean from the inside and the dust is collected in a drawer which can be easily emptied. The filter is ready to use again and delivers its maximum performance!
The WF-Eco for the metal industry is made of powder coated sheet steel with a strong wall bracket. The Flexi extraction arms (1.5-2-3mtr.) can be mounted directly underneath. Longer extraction arms have to be mounted under the WF-Eco and connected to it. The WF-Eco can also be connected to a central extraction system.
The dimensions are: 485 x 1000 x 485 mm. (hxwxd). The weight: 70 kg.
The air volume is 1000 m3/h
The noise level is 65 dB
Filter area is 14m2
