Extraction Tables Laboratories Mesa
| Art. Nr. | Mesa Suction tables: |
|---|---|
| P-774 | Super-Mesa 1m with side panels 1mx1m (LxW) |
| P-775 | Super-Mesa 1.4m emt side panels 1.4m x 1m(LxW) |
| P-776 | Maxi-Mesa 1m with side panels and 75mm U-shaped wide iron bars |
| P-777 | Maxi-Mesa 1.4m with side panels and 75mm U-shaped iron bars |
| P-782 | Maxi-Mesa 1m with side curves and vertical 40×5 mm flat bars |
| P-783 | Maxi-Mesa 1.4m with side panels and vertical irons 40×5 mm |
| P-778 | Spark Stairs for Maxi-Mesa / Super-Mesa 1m. 2 pieces |
| P-779 | Spark Staircase for Maxi-Mesa / Super-Mesa 1.4m 2 pieces |
| P-069 | Flexi FLB Suction arm 1,5m. Diameter 160mm |
Extractor tables Laboratories Mesa
Plymoth Maxi-Mesa is a modern combined Backdraft and Downdraft table with built-in control valve for laboratories. Models of 1 m and 1.4 m.
Plymoth Super-Mesa is a modern Backdraft table with built-in control flap for laboratories. Models of 1 m and 1,4 m.
Stof, smoke and gases
Plymoth Maxi-Mesa is suitable for welding and heavy grinding. It pulls backwards and downwards. Can be used in many other applications. The Mesa downdraft tables can be connected to an external filter or to your current extraction system if it is sufficient.
Unique control valve
Plymoth Maxi-Mesa/ Super-Mesa for your laboratory is equipped as standard with a control flap that makes it possible to adjust the width of the vertical openings of the rear panel. You can quickly adjust the total air volume between back suction and extraction with a handle at the front.
Right extraction openings.
The extraction is done via the rear panel (Super-Mesa) and from underneath (Maxi-Mesa). Its vertical funnel-shaped extraction openings guarantee maximum efficiency.
Extractor arm
For heavy welding, the Maxi-Mesa can be equipped with a Flexi FLB 1.5 m extraction arm. Thanks to the unique control valve, the total air volume can be divided between post extraction, under extraction, and the extraction arm.
Renewed design
Plymoth Maxi-Mesa/ Super-Mesa is made of 2 and 3 mm sheet steel. The table height can be adjusted from 800-950 mm. The side panels can be opened for long objects. Suitable air volume for 1m table is 1500-2000m3/h and for 1.4m table 2000-3000m3/h. It is connected to an external fan and extraction system. Connection diameter is 199 mm outside.
CF-Eco
The CF-Eco filter is designed for use in combination with the Maxi downdraft tables. With a filter efficiency of up to 99.9%, the CF-Eco is suitable for filtering, for example, welding fumes, grinding dust, etc. The clean air is recirculated into the room without heat loss. The CF Eco can be equipped with an additional filter:
- HEPA 13 Filter
- Active carbon filter
